How do you install a pull-out kitchen faucet with touch control?
Installing a touch-control pull-out kitchen faucet is a manageable DIY upgrade if you take it step by step. Plan for about 60–90 minutes, clear out the cabinet, and keep a towel handy to catch drips.
1) Shut off water and prep the sink area
Turn off the hot and cold shutoff valves under the sink, then open the old faucet to relieve pressure. Place a bucket under the supply lines and disconnect them. If you’re replacing an existing faucet, remove the mounting hardware and lift the old faucet out, then clean the sink deck so the new gasket seals well.
2) Set the faucet and secure the mounting hardware
Feed the faucet’s hoses (and touch-control wire, if separate) down through the sink hole. Seat the base plate or gasket flat, then thread on the mounting bracket and nut from underneath. Align the faucet so it’s straight, then tighten evenly—snug is enough to prevent movement without warping the sink deck.
3) Connect the pull-out hose and weight
Click or thread the pull-out hose into the faucet body per the connector style, then attach the spray head. Install the counterweight on the hose at the recommended spot so the hose retracts smoothly without hitting plumbing or the cabinet wall.
4) Hook up water lines and check for leaks
Connect the hot and cold supply lines to their matching shutoff valves, then slowly turn the water back on. Run water for a minute, toggling between spray and stream, and inspect every connection for leaks. Tighten a quarter turn at a time only if needed.
5) Install touch control power and test
Touch faucets typically use a battery pack or AC adapter and a control box. Mount the box high in the cabinet (away from the disposal), connect the sensor wire, and add batteries or plug in the adapter. Test by tapping the spout/body to turn water on/off and confirm normal manual handle operation.
For model-specific parts, wiring placement, and finish-care tips, follow the full guide here: https://originzerostores.com/guide-gun-gray-brass-touch-pull-out-kitchen-faucet-luxury-upgrade/.
FAQ
Do touch kitchen faucets need electricity?
Yes. Most run on a battery pack, while some can use an AC adapter; the valve stays functional through the handle even if touch power is off, depending on the model.
Recommended for you
Leave a comment